Technical specifications of SPRUT moduls

Designed to create fast-acting automatic fire extinguishing systems based on them, which are used for the protection of objects where the occurrence of Class A, B, C fires, and live electrical installations up to 35 kV is possible. They can be used as an autonomous fire extinguishing means (without external power sources) to protect small volume objects (garage boxes, diesel compartments, painting chambers, containers, etc.).

Depending on the design of the shut-off and spray device that ensures the distribution of fire-extinguishing powder in the protected area, the modules have two basic modifications – SPRUT(v) and SPRUT(s). The modules of the basic modifications V and S (SPRUT-1v, SPRUT-1s, SPRUT-3v, SPRUT-3s, SPRUT-6v, SPRUT-6s, SPRUT-9v, SPRUT-9s, SPRUT-12v, SPRUT-12s, SPRUT-15v, SPRUT-15s), according to DSTU3972-2000 (National Standard of Ukraine), due to their inertia, belong to fast-acting fire extinguishing systems; modules SPRUT-1 are impulse action modules (duration of extinguishing agent discharge up to 0.5s), while other sizes are short-term action modules (duration of extinguishing agent discharge from 1.2 to 5s).

SPRUT(v) modules mainly provide a volumetric method of fire extinguishing, while SPRUT(s) modules mainly provide a surface method of fire extinguishing. These modules are intended for use as part of automatic fire extinguishing systems.

For autonomous fire extinguishing, modules of construction design 01 or 02 of both basic modifications should be used, which differ in that design 01 does not have an electromechanical actuator (EMA) but has a pressure indicator (PI), while design 02 does not have an electromechanical actuator and pressure indicator.

For example, SPRUT-9v-01 or SPRUT-12s-02. Modules of these mentioned construction designs are mostly installed on the ceiling.

CERTIFICATE OF CONFORMITY

The high reliability and relatively low cost of SPRUT modules have made them a leader among such systems in the Ukrainian market.

SPRUT Powder Fire Extinguishing Modules (MPP) are an effective means for extinguishing Class A, B, C, and E fires, both in small quantities (garages, electrical cabinets, containers, diesel equipment, etc.) using autonomous modifications, and in large volumes and areas (workshops, warehouses, oil and gas storages, cable vaults, etc.) using the possibility of constructing automatic modification fire extinguishing systems.

IF YOU HAVE ANY QUESTIONS

REGARDING ORDERING AND TECHNICAL SUPPORT FOR SPRUT MODULES OR ORDERING FACTOR FIRE-EXTINGUISHING POWDERS, PLEASE CALL AND SEND MESSAGES TO THE FOLLOWING NUMBER IN MESSENGERS:

PFEM «SPRUT»

Photos of SPRUT Module Images

DIFFERENT CONFIGURATIONS

prut 15 – a powder fire extinguishing module with a 15kg powder charge, protecting an area of 90m2 or a protected volume of 288m3.

Sprut 1 – a powder fire extinguishing module with a 1kg powder charge, protecting an area of 6m2 or a protected volume of 12m3.

Sprut 3 – a powder fire extinguishing module with a 3kg powder charge, protecting an area of 20m2 or a protected volume of 60m3.
Sprut 6 – a powder fire extinguishing module with a 6kg powder charge, protecting an area of 45m2 or a protected volume of 120m3.
Sprut 12 – a powder fire extinguishing module with a 12kg powder charge, protecting an area of 75m2 or a protected volume of 228m3.

Sprut 9 – a powder fire extinguishing module with a 9kg powder charge, protecting an area of 62m2 or a protected volume of 188m3.

Sprut 3 – a powder fire extinguishing module with a 3kg powder charge, protecting an area of 20m2 or a protected volume of 60m3.

Sprut 6 – a powder fire extinguishing module with a 6kg powder charge, protecting an area of 45m2 or a protected volume of 120m3.

Sprut 9 – a powder fire extinguishing module with a 9kg powder charge, protecting an area of 62m2 or a protected volume of 188m3.

Sprut 12 – a powder fire extinguishing module with a 12kg powder charge, protecting an area of 75m2 or a protected volume of 228m3.

Sprut 15 – a powder fire extinguishing module with a 15kg powder charge, protecting an area of 90m2 or a protected volume of 288m3.

PFEM «SPRUT»

Drawing of SPRUT modules

IF YOU HAVE ANY QUESTIONS

REGARDING ORDERING AND TECHNICAL SUPPORT FOR SPRUT MODULES OR ORDERING FACTOR FIRE-EXTINGUISHING POWDERS, PLEASE CALL AND SEND MESSAGES TO THE FOLLOWING NUMBER IN MESSENGERS:

JOIN US!

WE ARE ON SOCIAL MEDIA: